Fabric Hardware Requirements for POC Installations
Introduction
- This document provides information regarding hardware, software, and operating system requirements for Fabric and TDM proof-of-concept installations.
- The installation is based on Docker containers.
- TDM Installation is based over Fabric installations
Fabric Studio Windows Server
For Local Installation:
- Windows Version -- Any one of the following: 10/11/2012/2016/2019 64bit Machine
- 8 Cores/vCPUs.
- 8GB RAM
- 100GB Available Disk Space
For Cloud Installation:
- AWS: EC2: a1.2xlarge, m5.xlarge
- Azure VM: A8v2
- GCP: e2-standard-4
Windows Ports
The following ports should be opened on the Windows server:
- 3389 - Used for RDP
Windows Permissions
Local administrator privileges are needed for the Fabric Studio installation.
Minimum Software Requirements
- Notepad++
- 7zip
- WinSCP
- Putty
- TortoiseGit: https://tortoisegit.org/download/
- Intellij IDE (community edition): https://www.jetbrains.com/idea/download/download-thanks.html?platform=mac&code=IIC
POC Linux Execution Server Specifications
The required Docker image list is listed on the guide for the designated enviroment to be installed (FABRIC/TDM)
Minimum Hardware Configuration for Each Linux Server
RedHat/CentOS 7 or Higher, Ubuntu 20 or higher Operating System, with latest Docker Engine, and latest docker-compose installed
Hardware Requirements:
- Modern Xeon Processor.
- CPU 8 Cores/vCPUs (16 recommended).
- 64GB RAM.
- Network: Minimum 1G between the nodes and source DB's
- Storage: The preferred storage is attached local SSD's devices, that IOS provisioning can be set. The /var/lib/docker directory requires a volume of at least 200G * Should be increased based on project scope and data retention requirements
For a Cloud Installation:
- If using AWS: EC2: m5.4xlarge
- If using Azure VM: D16d v4
- If using GCP: e2-standard-8
Linux Ports
Open the following ports on the LINUX server and make sure they are accessible from outside the machine:
depends on your setup, not all ports will be required.
| 22 | SSH, SCP |
| 3213, 9443, 5124, 6379 | Fabric |
| 9042, 9142 | Cassandra |
| 9093, 7270 | Kafka |
| 3000, 9090 | Grafana stack |
| 5432 | PostgreSQL |
Connectivity
All servers should have access (permissions) and connectivity (network) to all legacy & target systems.
Fabric Hardware Requirements for POC Installations
Introduction
- This document provides information regarding hardware, software, and operating system requirements for Fabric and TDM proof-of-concept installations.
- The installation is based on Docker containers.
- TDM Installation is based over Fabric installations
Fabric Studio Windows Server
For Local Installation:
- Windows Version -- Any one of the following: 10/11/2012/2016/2019 64bit Machine
- 8 Cores/vCPUs.
- 8GB RAM
- 100GB Available Disk Space
For Cloud Installation:
- AWS: EC2: a1.2xlarge, m5.xlarge
- Azure VM: A8v2
- GCP: e2-standard-4
Windows Ports
The following ports should be opened on the Windows server:
- 3389 - Used for RDP
Windows Permissions
Local administrator privileges are needed for the Fabric Studio installation.
Minimum Software Requirements
- Notepad++
- 7zip
- WinSCP
- Putty
- TortoiseGit: https://tortoisegit.org/download/
- Intellij IDE (community edition): https://www.jetbrains.com/idea/download/download-thanks.html?platform=mac&code=IIC
POC Linux Execution Server Specifications
The required Docker image list is listed on the guide for the designated enviroment to be installed (FABRIC/TDM)
Minimum Hardware Configuration for Each Linux Server
RedHat/CentOS 7 or Higher, Ubuntu 20 or higher Operating System, with latest Docker Engine, and latest docker-compose installed
Hardware Requirements:
- Modern Xeon Processor.
- CPU 8 Cores/vCPUs (16 recommended).
- 64GB RAM.
- Network: Minimum 1G between the nodes and source DB's
- Storage: The preferred storage is attached local SSD's devices, that IOS provisioning can be set. The /var/lib/docker directory requires a volume of at least 200G * Should be increased based on project scope and data retention requirements
For a Cloud Installation:
- If using AWS: EC2: m5.4xlarge
- If using Azure VM: D16d v4
- If using GCP: e2-standard-8
Linux Ports
Open the following ports on the LINUX server and make sure they are accessible from outside the machine:
depends on your setup, not all ports will be required.
| 22 | SSH, SCP |
| 3213, 9443, 5124, 6379 | Fabric |
| 9042, 9142 | Cassandra |
| 9093, 7270 | Kafka |
| 3000, 9090 | Grafana stack |
| 5432 | PostgreSQL |
Connectivity
All servers should have access (permissions) and connectivity (network) to all legacy & target systems.
