Fabric OVA - Switch Network IP Configuration

• The VM is pre-set to start with DHCP configuration

• The configuration templates for each mode are located under the folder /etc/netplan.

  • For DHCP configureation, the file name is: 00-installer-config.yaml.dhcp

  • For static configuration, the file name is: 00-installer-config.yaml.static

To switch configuration to a static IP address, follow the below instructions:

1. Copy the template file.

   cp /etc/netplan/00-installer-config.yaml.static /etc/netplan/00-installer-config.yaml
   

2. Edit the copied file with the requested configuration:

   nano /etc/netplan/00-installer-config.yaml
   

   (update the IP address and Subnet, Default Gateway and the DNS IPs)

   network:
       version: 2
     renderer: networkd
     ethernets:
       enp0s3:
        dhcp4: no
        addresses: [192.168.1.222/24]
        gateway4: 192.168.1.1
        nameservers:
          addresses: [8.8.8.8,8.8.4.4]
   

3. Apply Configuration:

   netplan apply
   

4. Reconnect to the server with the assigned IP address and continue with the setup process.