Fabric Setup for Azure AD LDAP
This authentication setup should be done from the Management Center using Azure AD (Active Directory), and via LDAP.
Do the following:
Prerequisites
A user must be set up so you can query the AD.
From your IT or AD administrator, you must get the following parameters:
- user & password
- user group
- admin_dn
- users_base_dn
- AD certificates in cer format and password as needed
Below is an example of such parameters:
- user: k2vfabric
- user password: Q1w2e3r4t5
- user group: K2vtdaadmin
- admin_dn:
CN=K2vtdaadmin,cn=users,DC=k2vfabric - users_base_dn:
CN=Users,DC=k2vfabric,DC=local - AD (LDAPS mode):
k2-fabric-ldap.k2vfabric.local - AD port: 389
Steps
The following steps must be carried out on all Fabric nodes by the root user:
- Update the /etc/hosts (if you cannot resolve the AD's DNS)
echo "10.21.1.134 k2-fabric-ldap.k2vfabric.local" >> /etc/hosts
Connect as fabric user
Update the admin_privileges file on one fabric node only (the one that you will start with first).
In this file we will insert the name of group that the user will use as fabric admin, and the AD to which the user belongs. In our example K2vtdaadmin
cd $K2_HOME/
echo "K2vtdaadmin" > $K2_HOME/config/admin_privileges
- Config Fabric's config.ini file as follows:
cd $K2_HOME/
sed -i "s@#SERVER_AUTHENTICATOR=.*@SERVER_AUTHENTICATOR=adldap@" $K2_HOME/config/config.ini
sed -i "s@#url=.*@url=ldaps://k2-fabric-ldap.k2vfabric.local:636@" $K2_HOME/config/config.ini
sed -i "s@#admin_dn=.*@admin_dn=CN=K2vtdaadmin,cn=users,DC=k2vfabric,DC=local@" $K2_HOME/config/config.ini
sed -i "s@#admin_password=.*@admin_password=Q1w2e3r4t5@" $K2_HOME/config/config.ini
sed -i "s@#users_base_dn=.*@users_base_dn=CN=Users,DC=k2vfabric,DC=local@" $K2_HOME/config/config.ini
For more information about how Fabric works with LDAP see here. For more information about SAML configuration in Fabric, please see here.
Fabric Setup for Azure AD LDAP
This authentication setup should be done from the Management Center using Azure AD (Active Directory), and via LDAP.
Do the following:
Prerequisites
A user must be set up so you can query the AD.
From your IT or AD administrator, you must get the following parameters:
- user & password
- user group
- admin_dn
- users_base_dn
- AD certificates in cer format and password as needed
Below is an example of such parameters:
- user: k2vfabric
- user password: Q1w2e3r4t5
- user group: K2vtdaadmin
- admin_dn:
CN=K2vtdaadmin,cn=users,DC=k2vfabric - users_base_dn:
CN=Users,DC=k2vfabric,DC=local - AD (LDAPS mode):
k2-fabric-ldap.k2vfabric.local - AD port: 389
Steps
The following steps must be carried out on all Fabric nodes by the root user:
- Update the /etc/hosts (if you cannot resolve the AD's DNS)
echo "10.21.1.134 k2-fabric-ldap.k2vfabric.local" >> /etc/hosts
Connect as fabric user
Update the admin_privileges file on one fabric node only (the one that you will start with first).
In this file we will insert the name of group that the user will use as fabric admin, and the AD to which the user belongs. In our example K2vtdaadmin
cd $K2_HOME/
echo "K2vtdaadmin" > $K2_HOME/config/admin_privileges
- Config Fabric's config.ini file as follows:
cd $K2_HOME/
sed -i "s@#SERVER_AUTHENTICATOR=.*@SERVER_AUTHENTICATOR=adldap@" $K2_HOME/config/config.ini
sed -i "s@#url=.*@url=ldaps://k2-fabric-ldap.k2vfabric.local:636@" $K2_HOME/config/config.ini
sed -i "s@#admin_dn=.*@admin_dn=CN=K2vtdaadmin,cn=users,DC=k2vfabric,DC=local@" $K2_HOME/config/config.ini
sed -i "s@#admin_password=.*@admin_password=Q1w2e3r4t5@" $K2_HOME/config/config.ini
sed -i "s@#users_base_dn=.*@users_base_dn=CN=Users,DC=k2vfabric,DC=local@" $K2_HOME/config/config.ini
For more information about how Fabric works with LDAP see here. For more information about SAML configuration in Fabric, please see here.
